Author Topic: Chrome two-eared spinners  (Read 5112 times)

rsk289

  • Full Member
  • ***
  • Posts: 154
    • View Profile
Chrome two-eared spinners
« on: September 24, 2019, 10:31:44 »
I posted this in the Cobra forum - I think it applies to Aces etc. as well, but not sure.

There's a slight possibility that a run of correct-pattern chrome two-eared 42mm 8tpi spinners could be made to the attached design.

Before this can go any further, would any interested please let me know likely numbers?

Thanks, Roger

Emjo

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Chrome two-eared spinners
« Reply #1 on: January 21, 2020, 18:03:36 »
Hi yes I would be interested in four original type two eared spinners as the ones on my car are poor copies I suspect made in China
Your message was posted some months ago now not sure if you had a good response

Let me know please

John

rsk289

  • Full Member
  • ***
  • Posts: 154
    • View Profile
Re: Chrome two-eared spinners
« Reply #2 on: January 21, 2020, 18:22:52 »
Thanks John,
The project is ongoing - I'm chasing the manufacturer for a price this week.  I'll add you to the list.

Roger

Vincent998

  • Jr. Member
  • **
  • Posts: 51
    • View Profile
Re: Chrome two-eared spinners
« Reply #3 on: January 26, 2020, 19:20:31 »
I'm interested also. Thanks for the effort!

ctpearce

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: Chrome two-eared spinners
« Reply #4 on: January 28, 2020, 18:15:47 »
these were available from Orsons ( www.orsonequipment.co.uk )and from Gerry Hawkridge (I think his were from Orsons) Not on thewebsite currently but I'm sure they would welcome an order.
Chris.

rsk289

  • Full Member
  • ***
  • Posts: 154
    • View Profile
Re: Chrome two-eared spinners
« Reply #5 on: January 28, 2020, 18:21:01 »
Gerry sells the standard Orson offering, which is incorrect for period Cobra.  It is Gerry and Orson who are planning the more accurate version.

Emjo

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Chrome two-eared spinners
« Reply #6 on: February 21, 2020, 12:05:47 »
Good morning any updates on price availability please

rsk289

  • Full Member
  • ***
  • Posts: 154
    • View Profile
Re: Chrome two-eared spinners
« Reply #7 on: February 21, 2020, 13:39:26 »
Still waiting - I'll get back to Gerry and Orson today.

Roger

Emjo

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Chrome two-eared spinners
« Reply #8 on: July 12, 2020, 13:45:44 »
Good Afternoon
Any updates in regards to the spinners please

Thank you

rsk289

  • Full Member
  • ***
  • Posts: 154
    • View Profile
Re: Chrome two-eared spinners
« Reply #9 on: July 12, 2020, 16:00:30 »
Yes - the manufacturer is now back working again, and we are hoping to get some idea of likely prices before much longer.
Please bear with us, it's still ongoing!

rsk289

  • Full Member
  • ***
  • Posts: 154
    • View Profile
Re: Chrome two-eared spinners
« Reply #10 on: September 10, 2020, 23:08:27 »
This is still plodding through the production process, now that things are getting a little more back to normal in the industry.

I am sending pms to those who have expressed interest in the AC spinners to ask for email addresses so that I can contact them more easily, so please watch your message inboxes.

Thanks for your patience!

Roger

rpv1

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Chrome two-eared spinners
« Reply #11 on: June 16, 2021, 17:12:25 »
Hello roger,  I too will be up four a set of four Left and Right hand 2 each.  Keep me in the loop too, thanks.  Phil.

MLeitao

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: Chrome two-eared spinners
« Reply #12 on: September 03, 2021, 18:16:57 »
Hi Roger,
I'm interested also in a set of four (left and right)
Thanks
Manuel