Author Topic: CS2030  (Read 10352 times)

rstainer

  • Sr. Member
  • ****
  • Posts: 321
    • View Profile
CS2030
« Reply #30 on: March 08, 2016, 13:38:47 »
Russ,
   
   Engines/blocks etc: I've emailed you a California source that's always come up with the goods for me.
   
   RS

MkIV Lux

  • Hero Member
  • *****
  • Posts: 639
    • View Profile
CS2030
« Reply #31 on: March 08, 2016, 13:58:14 »
quote:
Originally posted by nikbj68
   
Russ managed to find this fantastic shot of 2030, bearing the current registration too!
   
   
   

   
   how about the additional nose badge[?]

Morgy

  • Jr. Member
  • **
  • Posts: 85
    • View Profile
CS2030
« Reply #32 on: March 17, 2016, 20:04:28 »

swiftruss

  • Newbie
  • *
  • Posts: 17
    • View Profile
CS2030
« Reply #33 on: August 09, 2016, 13:18:58 »
Thanks again to all the club members who have helped me so far with parts and advice in relation to the restoration of CS2030. I look forward to meeting some of you personally for the fist time at The National Weekend. I will have the car with me and will welcome any comments or suggestions or further advice regarding its restoration to original specification. As I have such a good reference point for the restoration of the dashboard (above - see picture of the dashboard of CS2030 which were used in the drivers handbook)I would be most grateful if anyone could point me in the direction of any similar original instruments (working or not)

rsk289

  • Full Member
  • ***
  • Posts: 142
    • View Profile
CS2030
« Reply #34 on: August 10, 2016, 00:13:48 »
Just love the Gold Seal advert.  When I qualified in 1978, I treated myself to my first 'proper' car from Gold Seal in New Cross - a two-year-old Jensen-Healey, with the Lotus 907 engine.  Turned out not to be that 'proper', in fairly short order...
   
   Good luck with the car, Russ
   
   Roger

aaron

  • Sr. Member
  • ****
  • Posts: 477
    • View Profile
Re: CS2030
« Reply #35 on: August 23, 2019, 03:52:33 »
The car looks fabulous now, fitted with an original AC body

rsk289

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: CS2030
« Reply #36 on: August 29, 2019, 12:56:49 »
Russ, did you get the instruments all sorted in the end?  I can't remember where you had got to!

I've found a good route to getting a very accurate cable drive speedometer and tachometer made up using original instruments from another model.  If you're still stuck on this, get in touch.

Roger

swiftruss

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: CS2030
« Reply #37 on: September 04, 2019, 16:31:00 »
Many thanks Roger. Email sent.