Hi all,
I am wrapt to say that my Ace Bristol BE1175 is back on the road after 18 months having gearbox, brakes, suspension, steering etc done. In the first two weeks back on the road it has done over 600 miles and all is bedding in well (including driver).
I had earlier asked a question on removal of an overdrive greabox - I found it easiest to put the gearbox back from inside the car as opposed to from underneath - you need to rotate slighlty to install from the top. We also created a lip the was jacked up from under the sump to rest the gearbox on whilst it was moved gently onto the spline. If I can do it (a lowly banker) then anyone should be able to!
I am after a copy of a wiring diagram for an Ace Bristol with overdrive gearbox. If anyone has one that they could email through to me at the following email address it would be greatly appreciated:
kiwiacebristol@hotmail.com
Many thanks in advance
Glen Smytheman
