Author Topic: supercharger for mark iv?  (Read 3250 times)

gblue

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
supercharger for mark iv?
« on: March 31, 2007, 18:13:55 »
Is there a supercharger that can bolt right on to my 5 litre ford engine in my 1987 Mark IV?
   
   gregg......Maui

ak1234

  • Full Member
  • ***
  • Posts: 216
    • View Profile
supercharger for mark iv?
« Reply #1 on: April 01, 2007, 02:41:05 »
i WAS THINKING THE SAME THING .. i WOULD BET ONE FROM A 5.0L MUSTANG WOULD BOLT UP.
   
   RON

gblue

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
supercharger for mark iv?
« Reply #2 on: April 01, 2007, 06:54:52 »
http://www.superchargers4less.com
   
   found this site....they have 2 or 3 that increase power from 35-70.....
   
   gregg

jbottini

  • Hero Member
  • *****
  • Posts: 636
    • View Profile
supercharger for mark iv?
« Reply #3 on: April 01, 2007, 13:31:15 »
Guys, most all centrifigal supercharger manufacturers (Novi,Paxton, etc) offer one for a 5.0. Displacement types, Kenne Belle is the only one I've found "overhere". Both have advantages and disads, both will kick hp and rwt op by a third. Higher than that ,you have live ability issues.

SB7019

  • Full Member
  • ***
  • Posts: 237
    • View Profile
supercharger for mark iv?
« Reply #4 on: April 01, 2007, 15:31:26 »
Thde Superblower is, in effect, a MkIV 5 litre with the addition of a supercharger.  It is manufactured by Powerdyne and badged by Ford Motorsports.
   
   There is a good book written on how to uprate % Litre Ford's that includes a section on Superchargers.  It is called 5.0L Ford Dyno Tests by Richard Holdener ISBN No 1-88408-45-3.  It includes quite a lot of material on the Kenne Bell systems.

AK1440

  • Newbie
  • *
  • Posts: 26
    • View Profile
supercharger for mark iv?
« Reply #5 on: April 01, 2007, 15:41:05 »
I have a powerdyne silent belt drive supercharger fitted to my  modified 302/5.0 litre engine in my MKIV. I believe that this the same type fitted to the superblower series. http://www.powerdyne.com/
   Running at just less than 6psi the rolling road confirms 450 BHP at 5650 rpm and 430 ft lbs torque. Up to 9psi is available. Initially the engine suffered considerably from detonation, a new programmable ECU and an intercooler solved the problem.
   Show you a picture if you want.

cobramk4

  • Newbie
  • *
  • Posts: 3
    • View Profile
supercharger for mark iv?
« Reply #6 on: April 17, 2007, 23:28:59 »
Is anyone familiar with an installation for 5.0 carbureted which fits under the hood?  There are a few kits available for carb cars, but the Mustang kit mounts the compresor pretty high on the engine.

jbottini

  • Hero Member
  • *****
  • Posts: 636
    • View Profile
supercharger for mark iv?
« Reply #7 on: April 18, 2007, 02:14:59 »
some of the centrifical types offer kits for carburated 302's although they are tougher to find as the family is pre '84 or 85 (FI intro)