Author Topic: Aceca part needed  (Read 2719 times)

ivs

  • Newbie
  • *
  • Posts: 25
    • View Profile
Aceca part needed
« on: April 29, 2015, 23:58:15 »
Hello,
   Looking for the little handle that locks/moves the triangular small front window on the door.
   I need the right hand door one. Thanks
   Ignacio Vivancos
   ivivancos@austin.rr.com

Robin A Woolmer

  • Hero Member
  • *****
  • Posts: 665
    • View Profile
Aceca part needed
« Reply #1 on: April 30, 2015, 00:32:34 »
Look on the AC Spares list there are pairs of quarter light latches, this might be what you need! They might need finishing & possibly plating, worth a look.
   
   Robin

ivs

  • Newbie
  • *
  • Posts: 25
    • View Profile
Aceca part needed
« Reply #2 on: April 30, 2015, 04:16:26 »
Thanks Robin. I do have a set of those but apparently there seems to be two kind of those. The cast bronze reproduced ones are for later Acecas. Mine being a 55 has a different type. I did not know there were two types. I do not know when the change happened, maybe with the Bristol engine introduction.

Robin A Woolmer

  • Hero Member
  • *****
  • Posts: 665
    • View Profile
Aceca part needed
« Reply #3 on: April 30, 2015, 10:42:46 »
You might contact Steve Grey @ AC heritage who does bodywork re-builds, no doubt if you can find the model of car which originally had these it might assist as very few parts like this were specifically made for AC! Steve might know.
   
   Robin