AC Owners Club Forum > Ace, Aceca & Greyhound Forum

Lights failure

(1/2) > >>

bobbylangley:
I have an Aceca Bristol and just went to go out and neither the headlights, rear lights or spotlights will work. Indicators do and if I use the flasher for the spotlights, that works. Looked at the fuses and they all look OK. Any idea?

TTM:
What happens if you swap the fuses?

nicksonsticks:
Assuming all fuses are ok. Then using a 12v test light check for input feed to the light switch, operate switch and check to see if you have feeds out from the switch, you may find a wire detached at the back of the switch or that the switch is faulty or corroded/ dirty contacts.
Hope this is of help.
Kind regards Nick

Robin A Woolmer:
Have you checked the Ground/Earth is OK
Robin

James Eastwood:
I couldn't resist having a quick look at the wiring diag.

Power goes as follows;

1) Battery
2) Ammeter
3) Regulator
4) Lighting switch

A very quick sketch which I ran out of time to make look neater!

James

Navigation

[0] Message Index

[#] Next page