Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Gus Meyjes

Pages: [1] 2 3 ... 49
Ace, Aceca & Greyhound Forum / BE 646
« on: April 29, 2014, 02:16:33 »
   I have not been on the forum for a long time. Your work is fantastic! Amazing progress and quality!

Cobra (Thames Ditton) Forum / Cobra destuction - Spa Classic
« on: July 26, 2013, 20:47:52 »
Are there any pictures to post on this topic?

General Forum / 2013 International in the USA
« on: July 11, 2013, 02:58:20 »
Is that guy writing books about Cobras now?

General Forum / 2013 International in the USA
« on: July 09, 2013, 13:44:19 »
In hindsight, maybe the European and UK contingent is relieved they did not ship their priceless cars over to the US for the USA international...

Ace, Aceca & Greyhound Forum / Webers
« on: July 05, 2013, 22:15:44 »
I'm not sure that I would agree with that notion. I have DCOE's on a 260 engine and on a Kent Crossflow and don't have that experience. I find the webers tune well and rather easily. They are not just a carb for wide open top end power. It's no big deal. The engine is running very happily on the Su's. I was just curious to see if someone had gone through the trouble of making a manifold. Thanks for the reply.

Ace, Aceca & Greyhound Forum / BE 646
« on: July 04, 2013, 14:59:48 »
Peter, you've come a long way in 2 years! What a job! I was just looking at the fit of your headers. If you decide to use a heat wrapping, consider some additional space. This stuff works great in keeping the engine bay cooler, but is adds thickness to the pipe diameter.

Ace, Aceca & Greyhound Forum / Five speed conversion
« on: July 03, 2013, 18:29:18 »
This thread made me think to fit an overdrive to my Aceca. AC engine, moss box. Would I fit a J-type overdrive?
   Does anybody have any experience doing this?

Ace, Aceca & Greyhound Forum / BE 646
« on: June 27, 2013, 02:33:22 »
Peter, You're an artist! What a fabulous thread of your restoration!
   Keep it coming!

AC Weller Engine / Rocker cover breather
« on: June 27, 2013, 02:31:15 »
Changing the forum format and having greater ease of posting would be VERY welcome and likely encourage more use.
   The facebook format of "liking" comments and easily tagging onto a discussion or posting photos is definitely nice!

ACOC News and Events / Picturesque Pyrenees
« on: June 27, 2013, 02:28:05 »
Looks like a fabulous trip. I rode my motorcycle through that area about 26 years ago! It was great then. Would be great fun in an AC!
   great photos. And, unlike many posts, finally plenty of photos of the crowd, not just cars!
   Keep posting!

General Forum / BRM Watch
« on: June 14, 2013, 02:37:48 »
   Quota are not being met. We need a minimum 10 commitments. Don't have more than 4. so, if there is a sudden spike in interest, I'll get on it.

428 Frua Forum / engine overhaul
« on: May 19, 2013, 14:28:43 »
Just don't use the mcLeod throwout bearing... I replaced two and went back to the mechanical linkage. Maybe they got better in the past 5 years, but there were some serious problems with the seals.

Only if it rolled out the AC factory without engine and transmission installed...

General Forum / 17 year old form uckfield
« on: May 09, 2013, 03:08:08 »
What gives you that idea, Trevor?
   Peter, that will be one hell of a bike than...

Ace, Aceca & Greyhound Forum / BE 646
« on: May 08, 2013, 03:15:38 »
   The headers arrived in Holland. A bit of bad info: My mother got taxed for them... 85 Euro... [:(!][:(!][:(!]

Pages: [1] 2 3 ... 49