Messages

31

Ace, Aceca & Greyhound Forum / Re: Aceca battery tray

« on: April 18, 2021, 12:00:56 »

This is the location of the battery box on an Ace.......I am unsure if it is the same on the Aceca....if it is then this photo should help.

32

Ace, Aceca & Greyhound Forum / Re: Aceca seats

« on: April 05, 2021, 15:15:23 »

Hi Nick,
I have sent you a PM......did you get it ?
Regards, Luke

33

Ace, Aceca & Greyhound Forum / AC Ace chassis dolley

« on: March 31, 2021, 16:08:23 »

Good afternoon to one and all. I hope this post finds everybody in good health.
We have finally got AEX 443 back on its wheels and I have a dolley that was purpose made to move an Ace  chassis / car around the workshop.
It moves very freely and is in perfectly usable order and ideal for somebody who has a restoration project on the go or in mind.
It is located at Bromyard in Herefordshire and would be for the buyer to collect. I would like £300 for it which is what it cost me to have made.
Many thanks , Luke

34

Ace, Aceca & Greyhound Forum / Re: Looking for Ace/Aceca disc rotors?

« on: January 04, 2021, 19:53:33 »

Hi Keith,
Happy New Year to you .......and all members.
I have 2 spare pairs made from a batch. They are better grade iron than the original specification and are £400 per pair.
A couple of photos of progress on AEX443.
Regards, Luke

35

Ace, Aceca & Greyhound Forum / Re: Looking for Ace/Aceca disc rotors?

« on: January 04, 2021, 19:33:16 »

Hi Peter,
I have sent you a PM......feel free to give me a bell.
Regards, Luke

36

Ace, Aceca & Greyhound Forum / Re: Rev counter conundrum

« on: December 02, 2020, 18:40:45 »

I think you may have got it the wrong way round James......

37

General Forum / Re: So what are you doing down the garage during C-19.

« on: November 07, 2020, 06:32:43 »

Today the engine and gearbox went back into the car.

38

Ace, Aceca & Greyhound Forum / Re: Brake and Fuel pipe layout

« on: October 25, 2020, 12:29:34 »

If anybody has the time or inclination to take a few photos of the routings of brake and fuel lines and relevant junctions on their cars it would be appreciated.
I know there are people out there that own an Ace and that i am not the only one so get out your cellphones and snap away.
It would be good to have a resource of photos for future restorers.
Thanks, Luke

39

Ace, Aceca & Greyhound Forum / Brake and Fuel pipe layout

« on: October 23, 2020, 07:59:35 »

I hope this post finds everybody fit and well.
We are at the stage of fitting fuel and brake pipes to a Bristol engined Ace and wondered if anybody has diagrams / plans / photos of the setup.
Any information will be as ever greatly appreciated.
Luke

40

Ace, Aceca & Greyhound Forum / Re: Ace spare wheel Knob / Nut

« on: October 07, 2020, 07:42:09 »

Cannot quite make it out from the photo but are they threaded ?
Thanks, Luke

41

Ace, Aceca & Greyhound Forum / Ace spare wheel Knob / Nut

« on: October 06, 2020, 06:55:27 »

I hope everybody is well and keeping active in their garages.

I am looking for the castellated knob / nut that holds the spare wheel down in the boot and wondered if anybody has one or knows what other car they came from back in the day.
Any help much appreciated.
Luke

42

General Discussion / Re: Is this possibly the most boring Forum any where!

« on: September 03, 2020, 07:15:40 »

Not so boring ?

43

Mk IV, Superblower, CRS and other Continuation Cars Forum / Engine parts

« on: August 18, 2020, 08:11:29 »

If anybody needs spare parts I have a complete air and fuel intake assembly for a 5.0 Ford fuel injected engine with various pulleys and a/c motors.
Please feel free to send me a PM or contact on luke@stonesetltd.com
All the parts are from an original 1987 AC Cobra MKiv.
Regards to all and stay safe.
Luke

44

Ace, Aceca & Greyhound Forum / Re: NEED AC ACE/BRISTOL front end uprights

« on: March 25, 2020, 06:04:57 »

Hi Jim,
I sent you a PM through the acc item but maybe you did not receive it.
if you contact me via my email address below i may be able to help.
Cheers Luke
luke@stonesetltd.com

45

Ace, Aceca & Greyhound Forum / AC Ace clutch and brake pedals.

« on: February 11, 2020, 14:39:57 »

I am on the prowl for a pair of original clutch and brake pedals. If anybody has anything useful or salvageable it would be greatly appreciated.
Thanks in advance for any help.
Luke