Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - AE 501

Pages: 1 [2] 3
16
Ace, Aceca & Greyhound Forum / Re: ACE & ACECA BRISTOL TOOL BOARD
« on: September 27, 2018, 10:44:02 »
So great Luke!

Please send me an email to:  gies@berosafe.de

Thanks a lot!

Chris

17
Ace, Aceca & Greyhound Forum / Re: BE 646
« on: September 24, 2018, 12:28:18 »
.....and if you start producing a small batch of gearbox tunnels, please remeber to do one for me an my AC engined Ace  ;D 8)

And be happy about your tube in tube solution! 2.6 Aceca's should have a thicker tube wall I think. So well done  ;)

18
Ace, Aceca & Greyhound Forum / Re: ACE & ACECA BRISTOL TOOL BOARD
« on: September 20, 2018, 10:26:07 »
Hmmm, seems to be a closed theme. No member with a useful hint?

I'll try to make one from two pieces of wood, one with the holes for the tools; the other without. Glewing together should give something nearly original.

19
Ace, Aceca & Greyhound Forum / Re: ACE & ACECA BRISTOL TOOL BOARD
« on: August 17, 2018, 09:52:35 »
Hi Geoff,

what happened in the meantime? Did you reproduce the trays? And is it possible to buy on efor my Aceca?

Thanks a lot

Chris

20
Hi gents,

thank you all so much! more information for me than for James  8)

Well, in fact I don't know the great aluminium caps from my cars and I cannot see a reason exept of dirt prevention? Maybe someone thought to keep water away from the gap between friction pad and disc? I prefer to have air for cooling in this area.

Thanks again and happy motoring,
Chris

21
Hi James,

These parts are standart items on the callipers of TR 3. You should be able to find them at any TR dealer! Hope this helps.

By the way - does anyone know about the original equipment of clutch master and slave for my Aceca? They didn't come with the car and I'm looking for the right things.

Chris

22
Ace, Aceca & Greyhound Forum / Aceca Sunvisors
« on: May 22, 2018, 10:06:22 »
Hello at all,

I'm looking for a pair of usable sunvisors or even the triangular brackets for my Aceca AE501. I tried Brasscraft and they know what I need, but they are not able to produce only a pair for me (may be they need a bigger order?). I know the sunvisors are same like MG A coupe, but this doesn't make it easier anyway.

So if some of you could help, I would be very much appreciated.

Thanks a lot,

Chris

23
Ace, Aceca & Greyhound Forum / Aceca doors
« on: July 21, 2017, 11:24:55 »
Thank you all so much for your wishes.
   
   I thought I would send a private message to Luke - not realizing this appears in the thread! Sorry; I was not fishing for health wishes or boring you with my sickness...But nevertheless it's good to know you all beside me !!
   
   Luke made a great offer to me. So I will send him my locks and can use my time for the last wiring and trimming.
   
   THANK YOU ALL !
   
   Chris

24
Ace, Aceca & Greyhound Forum / Aceca doors
« on: July 20, 2017, 12:56:52 »
Hi Luke,
   
   leider haben mich diverse Erkrankungen weit zurück geworfen. Erst zum letzten Wochenende habe ich die Arbeiten an meiner Aceca wieder aufnehmen können. Nun, ich habe beide Türen wieder zerlegt und die Schlösser ausgebaut. Das Spiel zwischen den Zahnrädern ist allerdings ausgesprochen gering (< 1mm), so dass ich unsicher bin, ob und wie ich weiter vorgehen soll. Könntest Du ggf. die Schlösser für mich überholen? (natürlich gegen Entgeld). Ich würde gerne mit anderen Arbeiten weitermachen, da ich im Moment nicht weiß, wieviel Zeit mir noch bleibt (2. und3. August OP Prostatatumor)
   
   Gerne kannst Du mich unter gies@berosafe.de direkt kontaktieren - oder auch per WhatsApp oder telefonisch unter 0172-2512881.
   
   Ich würde mich freuen, von Dir zu hören,
   mit besten Grüßen
   Chris

25
Sorry, but YouTube is no longer available. Anyone has fixed it on his pc? I'd like to see this wonder as well!
   Please help.....
   
   Chris

26
Ace, Aceca & Greyhound Forum / Aceca doors
« on: March 18, 2016, 09:26:56 »
Just to pull this up to daylight - still hoping for any answer or contact to Tony. Regrettingly there was nothing after his friendly words from 9.9.14. Could anyone of you give him a push if possible?
   Thanks a lot
   Chris

27
Ace, Aceca & Greyhound Forum / Looking for a otter switch
« on: November 11, 2014, 11:41:16 »
Please have a look for me as well! If you can get some, I'd take 2 or 3 of theese missing parts - never found an alternative - even with Healeys or Jaguar XKs.
   
   Thanks a lot,
   Chris

28
Ace, Aceca & Greyhound Forum / Aceca doors
« on: September 11, 2014, 10:50:39 »
Tony, you made may day !!
   Thank you so much for your posting! I was looking for previous owners over the last years, but was'nt very succesful. I bought this lovely car on the Techno Classica fair in Essen in 1999. Nearly everythig was damaged exept of the gearbox. Few years ago I was able to meet Ken Rudd at the Goodwood Revival and we had a long talk about this car. He remebered it very well because of the small bench and told me this was a work of his own company. Asked for the reason he smiled and said: I loved the panic in the eyes of my co-drivers when they tried to tighten themselves during cornering! And yes, the bench is still in place! It took me nearly one year of work, to get the original leather soft and to do all the needlework on broken piping. Together with the car came the green log book, wich shows maroon as it's first colour. So I decided to bring her back to original specification. Hope you like my work so far......and the colour is really great, I think!
   And perhaps you can imagine how much I'm interested in every picture, letter, invoice or just remebering any details from the time you owned the car. Perhaps you know as well your previous owner and to whom you gave the car at least? If you are willing to,please send copies of all the stuff to my email adress: gies@berosafe.de and perhaps we will met some day personally.
   I'm somewhat nervous now and awaiting your answer!
   Thank you very much again,
   With kindest regards
   Chris

29
Ace, Aceca & Greyhound Forum / Aceca doors
« on: March 26, 2014, 09:22:29 »
Thanks a lot for your very useful help, Luke! As soon as I have some time I will try your hints.
   
   Perhaps the day will come, we have to manage a "sisters meeting"? But what about the car between us - AE 502?
   
   Chris

30
Ace, Aceca & Greyhound Forum / Aceca doors
« on: March 25, 2014, 12:25:33 »
long,long way to go......
   
   
   
   
   
   

Pages: 1 [2] 3