Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - minimans

Pages: [1] 2
1
Ace, Aceca & Greyhound Forum / Alternative to standard wire wheels?
« on: October 05, 2017, 20:38:56 »
How about Dunlop knock offs like the light weight e types use? They are available from Xk's unlimited

2
Recent ACs / Crank shaft end float.
« on: June 02, 2017, 03:11:00 »
Factory spec is .004 to .0014

3
Recent ACs / Crank shaft end float.
« on: June 02, 2017, 03:05:20 »
I have .008 to 0012  on a street build

4
Recent ACs / Decibels
« on: January 21, 2017, 21:35:07 »
There's plenty of them here in the USA. Just google "Cobra side pipe silencer"
   http://www.carchemistry.com/cc-inserts-silencer-sound-comparison-cobra-side-pipe-application/
   You could also try angling the outlet down toward the ground?

5
Ace, Aceca & Greyhound Forum / BE 646
« on: September 25, 2016, 06:47:48 »
That's looking good but I wouldn't try for the perfect fit till it's on it's wheels, the frame and body will always move a bit when it's got the full weight on the ground.

6
Ace, Aceca & Greyhound Forum / Ace/Aceca over riders
« on: July 30, 2016, 21:15:18 »
Anybody have a part number for those small round reflector's? I have a couple of box's of what look to be the same reflector they are mounted grommet style.

7
Ace, Aceca & Greyhound Forum / BEX 1000
« on: May 17, 2016, 04:50:10 »
Is the fiberglass buck undersized? or is the body now a little larger?

8
Ace, Aceca & Greyhound Forum / Fuel tank and straps
« on: March 10, 2016, 18:06:25 »
The fuel tank is going to an Aceca in Napa. Sorry Jim your call was about 60sec too late........Paul
   Still have the wheels though.............

9
Ace, Aceca & Greyhound Forum / Fuel tank and straps
« on: March 09, 2016, 23:11:37 »
Oh I'm up at Sears point, Infineon raceway, Sonoma Raceway, or whatever there calling it this week...............

10
Ace, Aceca & Greyhound Forum / Ace petrol (gas) tank straps
« on: February 06, 2016, 13:37:13 »
Oop's mine are for an Aceca not sure if there the same?

11
Ace, Aceca & Greyhound Forum / Ace petrol (gas) tank straps
« on: February 06, 2016, 13:36:02 »
I have a used tank and straps here in N. California if that's any help?

12
Cobra (Thames Ditton) Forum / CS2030
« on: December 23, 2015, 01:02:26 »
I guess that was my point ineffectively put by me! to preserve history is to basically leave it alone except to conserve it, to restore it is to put it back to a certain condition at a set point in its "history"

13
Cobra (Thames Ditton) Forum / CS2030
« on: December 21, 2015, 18:15:32 »
Preserving history is important and an antidote to the ever prevalent Modsports cars
   
   But what history are you preserving? The history of the car is that from creation to present surly? to take it back to a point in its history is to destroy the very history of the car? It's a very personal thing I know but as a professional car restorer it becomes a dilemma when advising customers of a course of action......Paul

14
Ace, Aceca & Greyhound Forum / Overdrive solenoid
« on: February 04, 2015, 01:06:11 »
Really you only need to lock out reverse to prevent the mentioned failure.

15
Ace, Aceca & Greyhound Forum / Clutch question
« on: May 31, 2014, 03:18:05 »
I just had to fit a slave cylinder for the same reason. it's the same cylinder used on 289 fords or I got mine from a Sunbeam Tiger specialist

Pages: [1] 2