Messages

1

General Forum / Goodwood Revival

« on: August 21, 2023, 08:02:52 »

Morning all and good luck with the restorations for those who purchased from the Anglia Car Auction.
I am on the prowl for 2 Friday tickets fro the Revival if anyone can help.
Cheers, Luke
luke@stonesetltd.com

2

Ace, Aceca & Greyhound Forum / Goodwood revival

« on: August 21, 2023, 08:02:07 »

Morning all and good luck with the restorations for those who purchased from the Anglia Car Auction.
I am on the prowl for 2 Friday tickets fro the Revival if anyone can help.
Cheers, Luke
luke@stonesetltd.com

3

Ace, Aceca & Greyhound Forum / Re: Anyone make these throttle shaft stands?

« on: June 30, 2023, 13:31:54 »

Pretty certain i have an original pair.
Please email me at  : luke@stonesetltd.com
Cheers, Luke

4

428 Frua Forum / Re: Driveshaft UJ's

« on: May 15, 2023, 07:10:28 »

Morning everyone....surely there must be somebody out there who has restored or changed the driveshaft UJ's and can offer some info ??
Thanks, Luke

5

428 Frua Forum / Driveshaft UJ's

« on: May 13, 2023, 15:48:06 »

Please can anyone let me know what the driveshaft UJ's are from for a 428 Frua and potential availability.
Cheers, Luke

6

Ace, Aceca & Greyhound Forum / Re: Looking for an Aceca Gear knob

« on: March 28, 2023, 13:07:24 »

I believe that SCParts have the correct Gear knob.
Cheers, Luke

7

Ace, Aceca & Greyhound Forum / Re: AC Ace steering box?

« on: June 24, 2022, 08:08:52 »

There used to be a gentleman in Westcott ,Surrey who specialised in worm and peg boxes and about 10 years ago he overhauled mine.
I had a quick look on the internet but cannot find him........maybe a more in depth look may uncover his whereabouts........or maybe somebody else on the forum can shed some light on the matter.......
Sorry to be a bit vague.....Luke

8

Ace, Aceca & Greyhound Forum / Re: AC Ace Hood Frame

« on: May 26, 2022, 09:26:06 »

I hope i am not stating the obvious but make sure you get the frame made to the hood that you have. It is inevitable that if you buy something pre fabricated that it will not fit.........have been down this road on more than one occasion.
Ragrds to all on the forum.
Luke

9

Ace, Aceca & Greyhound Forum / Re: 1960 Aceca Radiator

« on: May 17, 2022, 16:47:00 »

Hi Lev,
I have an original radiator for a Bristol engined car if you are interested..... I have sent you a PM but with no reply.....I hope you see this post.
Cheers Luke

10

Ace, Aceca & Greyhound Forum / Re: Ace flat alluminium panels - painted or left natural

« on: March 25, 2022, 15:32:11 »

We have used Scotchbrite with some oil and they look great and period.
Have a good weekend one and all.
Luke

11

Ace, Aceca & Greyhound Forum / Re: AC Ace project

« on: March 17, 2022, 17:59:29 »

Good evening to one and all.
I have recent experience of this matter having dealt with the DVLA. Continuous history is an ambiguous phrase. It can deal with ownership or the car as it has been during its lifetime. If the registration number has not been laid claim to ( which it hasn't)  then it is highly unlikely there is a chassis knocking around that somebody is going to suddenly rebuild ( especially after this amount of time ) I believe that with all the parts present and the knowledge of those in the club who are able to substantiate the car as being what it is that the DVLA would be satisfied that the car is RS5032 and would register it. Time will tell on this and even though the DVLA have become a lot stricter with the correct information hopefully we will see RS5032 registered back on the road and turning heads.

12

Ace, Aceca & Greyhound Forum / Re: Brake adjuster spanner and bleeder tools

« on: February 01, 2022, 06:19:18 »

All 20 sets of spanners have now been sold and dispatched. Hope everybody is happy and that their toolkits are now full.
Regards to All, Luke

13

Ace, Aceca & Greyhound Forum / Re: Brake adjuster spanner and bleeder tools

« on: December 30, 2021, 07:10:26 »

Would anybody like to own up to being "1590" on the forum.
I am accepting funds and sending out  the brake tools and i need to know who this handle belongs to so I can send them a set.
If anybody can help out it would be greatly appreciated.
Thanks, Luke

14

Ace, Aceca & Greyhound Forum / Re: Brake adjuster spanner and bleeder tools

« on: December 08, 2021, 16:38:08 »

OK everyone......below is a list of the people who have asked for brake bleed and brake adjustment spanners........I will have 20 of each at the end of the week which Keith has very kindly offered to dispatch.
Please let me know if your are not on the list and would like to purchase a set. Also can you let me know if your forum user name is duplicated by your real name. ( 1590 )  .
The list below eats up all 20 sets.......next batch will be ordered by the club but may take some time as the guy making them has other commitments..........2 NAMES WERE DUPLICATED SO WE HAVE 2 SETS AVAILABLE !!! 1 set gone and 1 set left....that last set has now gone.

WAITING FOR FEED BACK FROM......   1590

Cheers, Luke

Nick Wells  **
Chris pearce  **
Nigel Parkinson **
Luke Bryan  **
Jonas Linvall    x2 sets *
Ben Morgan  **
Greg Badano  *
Paul Anderson  **
Oliver Nuthall  *
Keith Lessiter  **
Bob Langley  **
Jerry Van Kalleveen  *
John Thompson
Roldan Boorman
William Cooke
Ian Mahany  **
Robert Baurdoux  *
Richard Urwin  **
Manuel Leitao

15

Ace, Aceca & Greyhound Forum / Re: Brake adjuster spanner and bleeder tools

« on: November 22, 2021, 18:29:25 »

My email for all who would like to order is luke@stonesetltd.com
Please send your postal address.
I will send an email to everybody who orders with PayPal details.
Kind regards, Luke