Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Robin A Woolmer

Pages: [1] 2 3
1
AC Weller Engine / AC Weller Engine Angle Drive
« on: December 11, 2020, 13:13:06 »
Just to let owners know, i have just received the sample of a new angle drive for the Tachometer , i will do an article for the AC Action to explain more, but they should be available from the manufacturer for about £100 but that will need to be confirmed.

Robin

2
AC Weller Engine / Thermostat Housings
« on: February 10, 2020, 17:23:54 »
Just a note to those owners needing a new Thermostat Housing, i have these now available, they are made to suit modern thermostats which have heat Ranges from 68 degrees Centigrade Up.
If you need information please contact me!

Robin

3
Vintage, PVT & 2 Litre Forum / 16/80 Stainless Exhaust Manifold
« on: November 03, 2018, 18:20:02 »
Has a 16/80 owner purchased a stainless exhaust manifold? an owner in Switzerland would like to have one for his 16/80!

Robin

4
AC Weller Engine / Change of EMail address
« on: May 15, 2016, 11:40:59 »
Dear All
   Due to a change of internet service provider I have now changed my Email address to ' robin.woolmer@zen.co.uk '
   
   If you use my AC-Engine web site please contact me on the new Email address as my web site is not at this time being monitored, I hope to be updating it shortly when I have found a suitable web manager & resolved any internet issues!

5
Vintage, PVT & 2 Litre Forum / PVT 10" Brake Drums
« on: May 22, 2015, 12:32:26 »
Is there any interest in new brake drums for the PVT AC Cars?
   If so please respond on the forum.
   
   Thanks
   
   Robin

6
Vintage, PVT & 2 Litre Forum / PVT Special EPA 196 for Sale
« on: August 13, 2014, 18:26:26 »
Dr Michael Dods is selling his very nice PVT Special Registration EPA196 Engine UMB379 two seat special, it is advertised on the VSCC web site.
   I understand considerable work has been carried out over several years, this car has quarter elliptic rear springs & is a nice looking special.
   I understand there are a good quantity of spares going with the car.

7
Vintage, PVT & 2 Litre Forum / PVT Front Stub Axles
« on: February 16, 2014, 19:03:14 »
It would seem that quite a number of cars may have cracked front stub axles, whilst the Post War Saloon stub axles are virtually the same as the PVT axles it would appear many are exhibiting cracking if crack tested. New forgings can be manufactured with new forging tooling & they can be CNC machined to a high standard in small batches using a higher grade of steel, & some slight design changes such as root radi to strengthen critical areas so offering a stronger axle such as has been done with the AC Ace/Aceca axles!
   
   How many people would purchase a set of new forged & machined stub axles if the Club were to arrange there manufacture with a reputable UK company?

8
AC Weller Engine / New Cast Iron Cylinder Heads
« on: January 18, 2014, 14:22:24 »
What interest is there for new cast iron heads? I will be putting an article in AC Action about this but it would be good to know how many owners would be interested in purchasing new cast iron heads.
   I am prepared to consider a one off batch.
   
   Robin

9
AC Weller Engine / AC Weller Engine Meeting 20th October 2013
« on: June 07, 2013, 17:58:21 »
I have now confirmation of the room booking at Gaydon for this date, the room will accommodate up to thirty people so if you wish to attend please let me know as early as possible.
   I will be contacting the last meeting attendees directly as well, don't forget if you are attending to list the topics & be prepared to bring parts for discussion.
   
   Thanks
   
   Robin A Woolmer

10
AC Weller Engine / AC Weller Engine Meeting 20th October 2013
« on: May 22, 2013, 17:27:29 »
Dear All
   Just to inform you that I have provisionally arranged this years AC Engine Meeting for October 20th 2013 to be at the Gaydon Museum again, would you be good enough to let me know if you are able to attend & what topics you would like to raise.
   We would start at 10 AM as before.
   I hope this date fits you all.
   
   Regards
   
   Robin A Woolmer

11
AC Weller Engine / AC Weller Engine Site
« on: December 29, 2012, 09:49:06 »
Thanks Bryan for setting this up for AC Engine owners & users, this is a follow on from the meeting in November for owners to exchange information & request help with the Weller engine.
   
   Robin

12
Vintage, PVT & 2 Litre Forum / Anzani Crank Cases
« on: June 15, 2012, 13:40:55 »
I have jusr read in the Frazer Nash Owners Wab site that new Engine Blocks are about to be cast by a guy in Australia, for those interested have a look at the Nash Site.

13
Ace, Aceca & Greyhound Forum / AC Ace With Morgan Steering Rack
« on: January 09, 2012, 16:08:16 »
Does any owner have a car which is fitted with a steering rack from Morgan Cars? Chris Lawrance apparantly did modify some AC Ace steering.
   
   Hope you can supply some information
   
   Robin A Woolmer

14
General Forum / Jon Sichel
« on: November 25, 2011, 18:14:36 »
I regret to inform members that Jon Sichel's Wife informed me this afternoon that Jon died last night of a severe heart attack.
   He will be clearly missed by his family & the many people who know Jon.
   I have no further information & would ask people to take care contacting the family until they are able to deal with matters.
   
   Jon is a great loss.
   
   Robin

15
Vintage, PVT & 2 Litre Forum / New PVT Front Wheel Hub Bearings
« on: January 11, 2011, 18:40:26 »
Orson Have new sets of front hubs & due to the obsolete outer bearing this is re-specified with a larger Cup O/D to suit the new modified hubs. A point also to note is that the old specification bearings have a very thin wall on the cup & in the case of one of my old hubs the cup is severely cracked.
   The bearings numbers for these new Orson Hubs is as follows-
   Timken 21075/21212 & 14125a/14274, you will also need an oil seal which originally was felt face fitting, so you may need to check what is available.
   I have provided this information to Orson to assist there customers.
   This is following a request for information from them.
   
   Robin

Pages: [1] 2 3