1
Ace, Aceca & Greyhound Forum / Re: Greyhound boot catch
« on: June 02, 2020, 14:18:08 »
Please... Anyone with a Greyhound... A boot catch picture would be really helpful...
tjdudley@westnet.com.au
tjdudley@westnet.com.au
News:
SMF - installed December 2017.
Returning members - please use the 'Forgot Password' function when logging in to the new Forum for the first time. If you have changed your email address please let me know so I can update it.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Ace, Aceca & Greyhound Forum / Re: Greyhound boot catch
« on: May 29, 2020, 08:15:45 »
Thanks John,
I'll have a look at that section. It's not the handle that I need a picture of its the catch that is in the body.
We have been in touch in 2015 about the car but I;ll email you again all the information.
Kind Regards
Trevor
I'll have a look at that section. It's not the handle that I need a picture of its the catch that is in the body.
We have been in touch in 2015 about the car but I;ll email you again all the information.
Kind Regards
Trevor
3
Ace, Aceca & Greyhound Forum / Re: Greyhound: track day tow hook?
« on: May 27, 2020, 03:02:49 »
Hello,
I have just replaced all of my front tubing as part of a complete rebuild and in my opinion nothing forward of the chassis rails or cross member is strong enough to attach to.
The chassis is the only option in my opinion. Maybe a clamp on tow point could be made up. Just my opinion but I'd weld a 5mm plate tow point to the front bottom face of each chassis rail and tow on both with a 'Y' connection that I also made up that the tow vehicle can connect to. But, thats just me.
Also, I'd say the same for the rear end since I have just replaced all of that too....chassis mount only.
Kind Regards
Trevor
I have just replaced all of my front tubing as part of a complete rebuild and in my opinion nothing forward of the chassis rails or cross member is strong enough to attach to.
The chassis is the only option in my opinion. Maybe a clamp on tow point could be made up. Just my opinion but I'd weld a 5mm plate tow point to the front bottom face of each chassis rail and tow on both with a 'Y' connection that I also made up that the tow vehicle can connect to. But, thats just me.
Also, I'd say the same for the rear end since I have just replaced all of that too....chassis mount only.
Kind Regards
Trevor
4
Ace, Aceca & Greyhound Forum / Greyhound boot catch
« on: May 27, 2020, 02:17:04 »
Hello all,
Please can someone send me a good picture of the Greyhound boot catch.
Even after carefully labeling and boxing all parts as part of a complete strip and rebuild I appear to have not labelled this part as well as I would now have liked to.
If it comes to it I can make one or if anyone has any ideas if its possible to buy one from somewhere I would be very grateful for the help.
Kind regards
Trevor
Please can someone send me a good picture of the Greyhound boot catch.
Even after carefully labeling and boxing all parts as part of a complete strip and rebuild I appear to have not labelled this part as well as I would now have liked to.
If it comes to it I can make one or if anyone has any ideas if its possible to buy one from somewhere I would be very grateful for the help.
Kind regards
Trevor
5
ACOC News and Events / Photobucket Photo Hosting
« on: August 08, 2017, 07:22:58 »
Please can we migrate to a new forum with direct hosting []
]
6
Ace, Aceca & Greyhound Forum / Alloy radiator
« on: July 14, 2017, 09:26:16 »
Wizard cooling did the Greyhound radiator for a recent Gassman Automotive Greyhound restoration. Maybe they can help you.
https://wizardcooling.com/british/ac-cars/greyhound/
http://www.gassmanautomotive.com/restorations/completed/1960-ac-greyhound/
https://wizardcooling.com/british/ac-cars/greyhound/
http://www.gassmanautomotive.com/restorations/completed/1960-ac-greyhound/
7
Ace, Aceca & Greyhound Forum / Greyhound door and boot hinges
« on: January 13, 2016, 01:40:17 »
Thanks guys.
My Door ones have worn too thin to machine and the boot has one that has cracked and consequently worn excessively. I have to replace.
Have had no luck searching the internet for this size.
Trevor
My Door ones have worn too thin to machine and the boot has one that has cracked and consequently worn excessively. I have to replace.
Have had no luck searching the internet for this size.
Trevor
8
Ace, Aceca & Greyhound Forum / AC door handle
« on: November 16, 2015, 04:05:57 »
Thanks for all the info. Really useful.
Trevor
Trevor
9
Ace, Aceca & Greyhound Forum / Greyhound drive shafts
« on: August 06, 2015, 09:26:07 »
Does anyone know where I can get a new yoke and shaft end with the 3" splines on it to replace the 2" one fitted as a replacement? My rebuilder in WA is having trouble finding a 3" one.
Thanks all
Trevor
Thanks all
Trevor
10
Ace, Aceca & Greyhound Forum / Suspension
« on: July 28, 2015, 07:54:50 »
Thanks for all the help again.
I have all the parts from Brian and a TR4 antiroll bar and parts from Rimmers....all looks good []
I have all the parts from Brian and a TR4 antiroll bar and parts from Rimmers....all looks good [
]
11
Ace, Aceca & Greyhound Forum / Greyhound drive shafts
« on: July 28, 2015, 07:52:59 »
Thanks all. I took it back to be re-done with the correct 3" spline.
12
Ace, Aceca & Greyhound Forum / AC door handle
« on: July 28, 2015, 07:50:26 »
It's the interior passenger side door release handle I need.
I'll try and dig out the drivers side one and get a picture up.
Kind Regards
Trevor
I'll try and dig out the drivers side one and get a picture up.
Kind Regards
Trevor
13
Ace, Aceca & Greyhound Forum / Greyhound drive shafts
« on: July 21, 2015, 13:58:02 »
I have pictures but i don't know how to upload them.
14
Ace, Aceca & Greyhound Forum / Suspension
« on: June 11, 2015, 13:40:23 »
Thanks Robin.
You wouldn't happen to know what other cars use the same one?
I have measured up all the dimensions for the car but have found that sellers don't show any dimensions for their antiroll bars.
You wouldn't happen to know what other cars use the same one?
I have measured up all the dimensions for the car but have found that sellers don't show any dimensions for their antiroll bars.
15
Ace, Aceca & Greyhound Forum / Greyhound lights
« on: October 28, 2014, 08:01:21 »quote:
Originally posted by dkp_cobra
At ebay: please click here
THANKS HEAPS [
][][] Just bought them.
Pages: [1] 2