Messages

1

Vintage, PVT & 2 Litre Forum / Re: Desperately seeking........

« on: August 07, 2019, 19:03:57 »

hi i left a contact for your wheel

2

Vintage, PVT & 2 Litre Forum / Re: AC 2 litre Seats

« on: August 07, 2019, 19:00:24 »

Hi did you get a seat briangwood

3

Vintage, PVT & 2 Litre Forum / Re: Still seeking a 16 inch rim for my 2 Litre Saloon.

« on: August 07, 2019, 18:50:01 »

Hi Gary ring Richard hudson 01757618467 very helpful had loads of spares from him brian

4

Vintage, PVT & 2 Litre Forum / 2-Litre suspension - on going issue

« on: February 10, 2012, 21:46:19 »

This used to be a common problem with leaf springs there is a tool to grease the springs It is in the form of a G clamp with a fine wedge at one side of the clamp and a similar wedge on the opposite end on this side a grease nipple is fitted forcing grease down through the wedge. prior to using this you jack up the car to releave tension off the spring and screw in the G clamp (wedges) I have one of these tools will post a picture if someone tells me how to.    briangwood

5

Vintage, PVT & 2 Litre Forum / how do i get a logbook

« on: October 17, 2011, 19:44:51 »

`
   hi Mike   Have have some photos of the car when i bought it but will take some more showing  the state it is in at the moment, will post them and all the relavent details that i have to hand thanks brian

6

Vintage, PVT & 2 Litre Forum / buckland bonnet hinge

« on: October 15, 2011, 19:16:45 »

thanks to everyone that replied now sorted with a good second hand one briangwood

7

Vintage, PVT & 2 Litre Forum / buckland bonnet hinge

« on: October 07, 2011, 21:53:00 »

yes thats correct i need both. The steel section is beyond repair and the chrome strip is in need of replacing. need them as the car is now ready for painting. can you sugest anywhere thanks brian

8

Vintage, PVT & 2 Litre Forum / how do i get a logbook

« on: October 15, 2011, 19:26:39 »

now that the buckland is nearing completion i find that i do not have a log book. DVLA have put the usual block on things. The car is on the register matching chassis, engine no, etc got the origional no plate etc. There must be a number of members that have gone through the proccess a few pointers would help thanks brian

9

Vintage, PVT & 2 Litre Forum / buckland bonnet hinge

« on: October 05, 2011, 19:59:13 »

does anyone know where to find /purchase a bonett hinge for my buckland  it probably be the same as the 2 ltr saloon car along with the chrome strip mine is rusted beyond repair thanks my car is on the register thanks brian