AC Owners Club Forum

AC Owners Club Forum => AC Weller Engine => Topic started by: Robin A Woolmer on February 10, 2020, 17:23:54

Title: Thermostat Housings
Post by: Robin A Woolmer on February 10, 2020, 17:23:54

Just a note to those owners needing a new Thermostat Housing, i have these now available, they are made to suit modern thermostats which have heat Ranges from 68 degrees Centigrade Up.
If you need information please contact me!

Robin

Title: Re: Thermostat Housings
Post by: Big col on February 12, 2020, 21:25:24

Hello Robin, am I right in presuming that the housings are for the later engines rather than a modification to the pre war ones.

Title: Re: Thermostat Housings
Post by: Robin A Woolmer on February 13, 2020, 08:51:01

Col
Yes these are for Post War engines for the 2-litre saloon, Ace & Aceca fitted with Weller engines.

Robin

Title: Re: Thermostat Housings
Post by: pjbowman on June 04, 2020, 02:02:46

Robin, sent you a PM regarding one.

Title: Re: Thermostat Housings
Post by: PaulAnderson on August 14, 2021, 07:25:51

I have bought one of these from Robin for my ACE and they are great. Perfect fit that takes modern racing thermostats.

Title: Re: Thermostat Housings
Post by: AndyN on August 14, 2021, 10:15:16

Hi Robin is it just the housing or do you have the 2 litre top hose connector too?

Title: Re: Thermostat Housings
Post by: Robin A Woolmer on August 14, 2021, 11:01:17

Andy
I have a couple of the 90 degree type which are AC New Old Stock!
I have casting patterns made to make more of these with extended length for hose connection, i understand both of these are to suit Ace & Aceca's
You could possibly adapt the rubber hose for use on 2-Litre cars.