AC Owners Club Forum
AC Owners Club Forum => Ace, Aceca & Greyhound Forum => Topic started by: geoff leigh on December 04, 2008, 21:11:38
-
Iam thinking of having a batch of tool boards made up for the Bristol engined ACE& ACECA, , they will work out at about £65 sterling each ( no tools included).Is any body interested ?
Regards,
Geoff
-
No response yet, I bit disappointing since it's a nice initiative.
I'm sure the proposed tool board would fit an Ace as well as an Aceca but regarding originality, isn't it so that the board was only fitted to the Aceca from new, the Ace having a tool roll instead of the tool board?
Jerry
-
Not sure about the Ace having a tool roll, I know for certain that the Greyhound had a tool tray fitted, although mine had a cut out for the plug spanner which the Aceca does not have.
The tool tray will be an exact replica,of a 58 Aceca Bristol and I only need a few more owners to reserve one, then I will place an order, (minimum batch)
It was a bit like this when I needed a rear screen for the Aceca in the end I ended up having those made, and sold quite a few to members of the acoc and also have a nice clear one in my own car.
Geoff
-
quote:
Originally posted by geoff leigh
Not sure about the Ace having a tool roll, I know for certain that the Greyhound had a tool tray fitted, although mine had a cut out for the plug spanner which the Aceca does not have.
The tool tray will be an exact replica,of a 58 Aceca Bristol and I only need a few more owners to reserve one, then I will place an order, (minimum batch)
It was a bit like this when I needed a rear screen for the Aceca in the end I ended up having those made, and sold quite a few to members of the acoc and also have a nice clear one in my own car.
Geoff
Geoff
A few years back Ron Leonard was selling Tool trays exact copies of origonal as fitted to AC Aceca / Aceca bristol and could be employed in spare wheel of Greyhound.
Part number TOO 001 for tray (Bristol)
Part number TOO 002 for tray ( AC)
Replica Tools also available .......
If my memory serves me well, I put these details on the Forum many moons ago.
Dare say as Leonard has had these made before he could order another batch. To cater for the Us & European market ..... Which could save time and money.
Mind you with the value of the £ against the $ and Euro it could be cheaper in the UK.
Keith
-
quote:
Originally posted by AC Ace Bristol
quote:
Originally posted by geoff leigh
Not sure about the Ace having a tool roll, I know for certain that the Greyhound had a tool tray fitted, although mine had a cut out for the plug spanner which the Aceca does not have.
The tool tray will be an exact replica,of a 58 Aceca Bristol and I only need a few more owners to reserve one, then I will place an order, (minimum batch)
It was a bit like this when I needed a rear screen for the Aceca in the end I ended up having those made, and sold quite a few to members of the acoc and also have a nice clear one in my own car.
Geoff
Geoff
A few years back Ron Leonard was selling Tool trays exact copies of origonal as fitted to AC Aceca / Aceca bristol and could be employed in spare wheel of Greyhound.
Part number TOO 001 for tray (Bristol)
Part number TOO 002 for tray ( AC)
Replica Tools also available .......
If my memory serves me well, I put these details on the Forum many moons ago.
Dare say as Leonard has had these made before he could order another batch. To cater for the Us & European market ..... Which could save time and money.
Mind you with the value of the £ against the $ and Euro it could be cheaper in the UK.
Keith
Geoff
Spent a few minutes scrolling through the Ace/Aceca Forum. And found the thread relating to Tool Boards.... The Old Grey Cells are still working, just a little slower.
Back on 14th January 2008 under the title "ACECA TOOL BOARD" you might find the info and contacts usefull reference repro boards & Tools and / or a few contacts who may just help make up the numbers to make it viable to produce small batch run.
Good Luck.
Keith
-
Keith
Thanks for the info.
I will see what happens.
Geoff.
-
Hi Geoff,
what happened in the meantime? Did you reproduce the trays? And is it possible to buy on efor my Aceca?
Thanks a lot
Chris
-
I would be up for one.
Chris (BE588)
-
I too would be interested for my AC Aceca. AEX 559
Jim
-
Also interested though for an AC engined aceca
Nigel
-
Hmmm, seems to be a closed theme. No member with a useful hint?
I'll try to make one from two pieces of wood, one with the holes for the tools; the other without. Glewing together should give something nearly original.
-
I made a tool board several years ago for my AC engined Aceca and have the pieces to make a second one. The cut outs are made for the original tools which I was able to source on Ebay over a period of months. Obviously some finishing is required but it was a fun project. I don't have any plans to make another one so if someone is interested, please contact me through the website. I live in the U.S so shipping to someone on this side of the pond might be less cumbersome.
Thanks,
Greg
-
I have an original drawing for a tool board which came in a job lot of spares, and would be happy to email a copy of it to whoever is interested.
I will try to post a photo of it later today but email may be more accurate.
Regards, Luke.
-
So great Luke!
Please send me an email to: gies@berosafe.de
Thanks a lot!
Chris
-
Great offer.
Please send an email to talbot.forbes@gmail.com.
I have an AC engined Aceca and am missing this part.
Thanks Jim
-
Hi,
I would also be interested in a copy for my aceca AEX534. Please send it to 356type@gmail.com
Thanks!
Ignacio
-
My drawings got water damaged and did not scan well, so I have sent them by post to I think Greg , so please email each other and I hope they are of some use.
Regards to all, Luke
-
Please don't forget about the drawings - whoever is the new owner ???!!!
PM as good as email.
Thanks, Chris
-
I have neither an original tool roll nor a tool board for my Ace, and would like whichever one was original. Can anyone tell me what RSX5006 would originally have been fitted with? If a tool board, you can put my name down for one. Do they fit inside 15 or 16 inch wheels, or can you get either?