AC Owners Club Forum
AC Owners Club Forum => Ace, Aceca & Greyhound Forum => Topic started by: bobbylangley on May 12, 2022, 21:16:24
-
I have an Aceca Bristol and just went to go out and neither the headlights, rear lights or spotlights will work. Indicators do and if I use the flasher for the spotlights, that works. Looked at the fuses and they all look OK. Any idea?
-
What happens if you swap the fuses?
-
Assuming all fuses are ok. Then using a 12v test light check for input feed to the light switch, operate switch and check to see if you have feeds out from the switch, you may find a wire detached at the back of the switch or that the switch is faulty or corroded/ dirty contacts.
Hope this is of help.
Kind regards Nick
-
Have you checked the Ground/Earth is OK
Robin
-
I couldn't resist having a quick look at the wiring diag.
Power goes as follows;
1) Battery
2) Ammeter
3) Regulator
4) Lighting switch
A very quick sketch which I ran out of time to make look neater!
James
-
Sorted now but thanks for all your suggestions and practical help!
-
What was the problem?