If you need the hood bows give Europasares a call or drive by to check if their bows will fit, if not it's not so much work to adapt them to your car. The bows can be bent and shortenend by hand easily, maybe you need a welder if you need to disassemble and weld in again the studs at the lower end of the bows.
A modification i id to some bows was removing the studs at the lower end of the bow tubes, cutting the hight, cut in some female thread and screw in a new stud with a male thread on the one and cylindrical on the other side. After this mods the bows are adjustable for hight what is needed sometimes to have the hood tensioned properly. But then it is not longer 'original'
Westcott