16
ACOC News and Events / April ACtion
« on: May 05, 2015, 11:16:53 »
Thanks Keith
News:
SMF - installed December 2017.
Returning members - please use the 'Forgot Password' function when logging in to the new Forum for the first time. If you have changed your email address please let me know so I can update it.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
ACOC News and Events / April ACtion
« on: May 04, 2015, 18:14:56 »
Will that be the first one after the January issue?
If not I'm missing Feb. and March :-(
Cheers
Migge
If not I'm missing Feb. and March :-(
Cheers
Migge
18
Ace, Aceca & Greyhound Forum / BE 646
« on: November 28, 2014, 10:25:53 »
Is it not better to remove the shell and sandblast the whole frame/chassis to see what's left?
19
Cobra (Thames Ditton) Forum / CSX2268 How Original ?
« on: March 11, 2014, 08:38:25 »
Can't remmeber if it was 2013 or maybe 2012 when the COB had a really huge damage from an accident in SPA. Can't find the pics.
21
Ace, Aceca & Greyhound Forum / BE 646
« on: October 17, 2013, 19:03:52 »
So you got the off? On a Thursday?
22
Mk IV, Superblower, CRS and other Continuation Cars Forum / Pedal Box Modifications
« on: September 03, 2013, 17:19:51 »
Mmh, have seen it before somewhere.
23
Ace, Aceca & Greyhound Forum / New Correct Ace,Aceca,Greyhound & Cobra Fuel Caps
« on: August 15, 2013, 13:38:37 »
Received my 2 excelent caps. Where can I get the threaded extension tubes?
24
Ace, Aceca & Greyhound Forum / New Correct Ace,Aceca,Greyhound & Cobra Fuel Caps
« on: August 11, 2013, 11:52:15 »
Thanks Nick
25
Ace, Aceca & Greyhound Forum / New Correct Ace,Aceca,Greyhound & Cobra Fuel Caps
« on: August 11, 2013, 10:59:04 »
So that means that we have to decide which one we want? Or was the old order just for cap?
26
Ace, Aceca & Greyhound Forum / New Correct Ace,Aceca,Greyhound & Cobra Fuel Caps
« on: July 18, 2013, 09:35:15 »
Any news Keith?
27
Cobra (Thames Ditton) Forum / AC Cobra in Germany: Real or replica...?
« on: July 09, 2013, 18:40:33 »
The rims don't look right, I can see a nut on the front wheel
28
Mk IV, Superblower, CRS and other Continuation Cars Forum / AK 1106 rework ...
« on: June 14, 2013, 13:31:18 »
I don't know how much turns on the upper arm will change the camber but I know the at a 15" wheel, exactly 15 3/8" apart from edge to edge, 1/8" or 3.2mm is 1/2 a degree difference or 6.4 mm foe 1 degree. Easy to measure but only rough calculation. So if the upper edge of the rim is 6.4 mm more in to the center than the bottom edge you have 1° negative camber.
Uwe, you wrote REAR Castor, I think you meant camber.
Cheers
Migge
Uwe, you wrote REAR Castor, I think you meant camber.
Cheers
Migge
29
Cobra (Thames Ditton) Forum / Tour Auto 2013-Cobra Identities?
« on: June 06, 2013, 15:41:33 »
Some years ago I bought a few of these plates