Topics

1

Ace, Aceca & Greyhound Forum / BRAKE FLUID 1960 ACECA

« on: July 20, 2022, 02:07:29 »

Guys Im down to the brakes, put 4-- miles on the car in the last week!
But the brakes area little soft.
Ive got drums and been redone. Needs a good flush and bleed.
DOT 4?
MINERAL FLUID?
Im not sure, cant find it anywhere.....
Thanks in advance.
gtjoey1314

2

Ace, Aceca & Greyhound Forum / DRIVERS REAR HUB/SPLINE SLIGHT WOBBLE

« on: April 06, 2022, 11:02:00 »

Well I resealed the rear, new u joints on half shafts but on my 1960 Aceca
After greasing and all my drivers/left side hub , click/wobbles a HAIR. The other side is perfect. Someone PUT new shafts in but it feels like a bearing wobble as if the hub nut can be a bit tighterbut I cant tighten any more.
Suggestions?
Can I take off the center nut and just PULL the splines towards me?
Maybe the bearing isnt seated?
gtjoey1314

3

Ace, Aceca & Greyhound Forum / half shaft alignment

« on: March 27, 2022, 02:18:03 »

Okay, while replacing my half shaft and drive shaft u joints on my 1960 Aceca, I noticed the passenger/right side half shaft yokes are NOT PARALLEL.
ITS cocked say 8 and 10 not parallel was this done on purpose for binding?
The car was fine before.....
Anyone know the answer?
Thanks in advance
GTJOEY1314

4

Ace, Aceca & Greyhound Forum / Aceca control arm bushings and…..

« on: February 23, 2022, 12:39:50 »

Okay where can I get
Control arm
Bushings for the 1960 Aceca
Along with
I joints for the driveshaft and half shafts ?
What brands ?
Thanks in advance
Gtjoey1314
I got my magazine , the word is out that the forum
Will be upgraded👍🏾

5

Ace, Aceca & Greyhound Forum / BEST STOCK EXHAUST FOR ACECA/ACE

« on: February 02, 2022, 00:36:40 »

For my 1960 Aceca , Ive seen the quicksilver exhaust and it looks great.
Any other options?
Thanks in advance
GTJOEY1314

6

General Forum / HAPPY NEW YEAR! I BOUGHT A ACECA!!!!

« on: January 31, 2022, 18:01:41 »

Some were not happy , not seeing a post for the new year so.......
HAPPY NEW YEAR!
I bought a 1960 Aceca, having fun with new friend Jim Feldman by phone!
Tank is out
Exhaust is out, I started a thread but its tough posting pictures!
Wishing EVERYONE Happy Holidays and A Happy New Year.
IS EVERYBODY HAPPY!!!!!
GTJOEY1314

7

Ace, Aceca & Greyhound Forum / Hello! GTJOEY BUYS A AC ACECA ! Need help....

« on: December 17, 2021, 12:41:54 »

I'm having fun!
From my Ford GT's to E type Jags, but its time for a little more fun.
I just picked up a 1960 Aceca
Its been sitting with the last inspection from 1981!
Its MINT underneath.....
First up after getting started, Im dropping the tank and want to drive this as a survivor not a restogone mad!
The tank should be   ALUMINIUM, NOT PAINTED BLACK?
Its going to be tanked next week.
First of many questions.....So fuel system first.
Thanks in advance.
GTJOEY1314