FYI - Here’s a pic of a pair of OEM stone guards that my father obtained from the AC Works back in the early 80’s. To answer your question about construction both the mesh and the frame appear to be aluminum. Note that they also came with a bunch of aluminum fender washers to secure them in place. I’d get you some dimensions, but they have finally been installed in my car so they’re a bit hard to measure. Hopefully Keith’s source works out for you.
Best Regards,
John
Hello John,
from your photo, it looks like they are "handed", in the sense that they are rolled over the frame from two different side.
If you look at them from top, it looks like the net is rolled over the edge from the top if you consider the longer side in the front with the longer edge pointing inward the car. can you confirm?
Despite the same shape this means that two type needs to be made. not a copy of the same.
As well could you or somebody let me know more about the frame? from your photo it looks bent on 3 corners and welded on the 4th corner.
I got the 4mm alloy rods and i will give it a go.
I cut a paper model on the measurement Nick provided here:
https://www.acownersclub.co.uk/forum/index.php?topic=1479.msg84064#msg84064Can somebody confirm that there are two 90 deggres angles and it is not a truncated cone?
I did a test, and to me it seems it fit better with the longer side of the larger edge pointing inwards.
(Shape B in my scketch for the right side of the car).
Thanks!
Eddie