enamel club badge

[nick Godridge]

If anybody out there has one for sale can they please contact me?
   
   Thx
   Nick G

[French Frie]

I already asked for it, as well as Club stickers, as they seem to be out of stock in ACtion, but no success []....

[westcott]

I have two, one with a small chipping. This one I would sell to a member, the other one came with my car and will be kept.
   I will take a pic and post it here.
   
   Uwe

[westcott]

Both badges side by side. The right one will stay with my car, the left one is for sale. But before her some remarks about the quality: It has a small chipping in the blue enamel near the top end of the A. An other small shipping can be seen in the middle of the A's bar, i applied some shadow to make it visible.
   In general the badge ( in my opinion, looking for surface failures all day no one can see) looks like a rejected production part, the enamel surface of all colors is not as shiny as it is on the right badge and the colors are a bit more intense.
   The left one is also a bit curved or bended and not as flat as the right one.
   
   
   
   
   
   
   
   From the distance ( more then 1 meter) it looks not too bad.

[BBK]

quote:Originally posted by westcott
   
I have two, one with a small chipping. This one I would sell to a member, the other one came with my car and will be kept.
   I will take a pic and post it here.
   
   Uwe
   
   

   
   Uwe, how much do you want for the badge you are willing to part with?

[French Frie]

Uwe, did you get my email,regarding this badge, three days ago ?

[raccoon]

quote:Originally posted by nick Godridge
   
If anybody out there has one for sale can they please contact me?
   
   Thx
   Nick G
   

[raccoon]

quote:Originally posted by nick Godridge
   
If anybody out there has one for sale can they please contact me?
   
   Thx
   Nick G
   

   
   I have a 1964 Owners Club badge which I bought for my 4.2 litre Cobra. I was never used for fear of theft and is therefore in mint condition. Have tried to attach photo but without success! Proposed price £55.
   
   Regards
   raccoon

[nikbj68]

quote:Originally posted by raccoon: I have a 1964 Owners Club badge which I bought for my 4.2 litre Cobra. I was never used for fear of theft and is therefore in mint condition...Proposed price £55.  Regards  raccoon

   Welcome to the forum!
   Here is the badge in question:
   
   Nice. []

[BBK]

I have purchased from EBay, an Owner's Club badge like the ones shown and looking for a way to install it on my Mk IV.  Below is a photo of a car that belonged to a Club member who sold it a few months ago.  His ACOC badge is attached via a badge clip and I would like to find one like this to attach mine similarly to the front bumper.  I have tried numerous sources and purchased a clip from a U.S. company (a 1" clip) but it was too small.  I checked with Moss and a looked on-line for other resources but to no avail. Does anyone know of a resource for a large enough clip to attach my badge similarly to the car shown below or is this a custom item that I will need to have fabricated?  Thank you!
   
   

[westcott]

DIY from stainless flat material if the 1" is too small.

[BBK]

quote:Originally posted by westcott
   
DIY from stainless flat material if the 1" is too small.
   
   

   
   I was hoping that there was a ready-made clip for sale out there somewhere in the world such that I don't have to make one.  This can be done as you suggest, unfortunately, I don't have the correct tools to shape one.   Any Mk IV owners find a way to attach their ACOC badge to the front hoop bumper without making a clip themselves from stainless steel?  If not, I will have to get one fabricated it seems.  Thanks.

[cobham cobra]

What about looking at a couple of P clips ? At least with the rubber section you won't mark the bar and the badge won't "fall over".
   http://www.ebay.co.uk/itm/10-x-Rubber-Lined-PClips-P-Clips-Metal-Clamps-Retaining-Hose-Cable-Wire-EPDM-/330706516002

[BBK]

quote:Originally posted by cobham cobra
   
What about looking at a couple of P clips ? At least with the rubber section you won't mark the bar and the badge won't "fall over".
   http://www.ebay.co.uk/itm/10-x-Rubber-Lined-PClips-P-Clips-Metal-Clamps-Retaining-Hose-Cable-Wire-EPDM-/330706516002
   
   

   
   Hi John.  Thanks for that link.  That seems to be a good possibility.  I will look into this further to see if this might work out.  Thanks again!

[nick Godridge]

Would be happy to buy if you still have it.
   
   Racoon, you can contatc me direct at nick@ngodridge.com