Messages

46

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: Clutch Quadrant Replacement

« on: August 27, 2019, 21:03:17 »

Plastic quadrant on the clutch pedal. A lot of people change it for a steel replacement....

There were threads on how to do it but they are dead links now.

47

Mk IV, Superblower, CRS and other Continuation Cars Forum / Clutch Quadrant Replacement

« on: August 26, 2019, 23:05:26 »

I am going to embark on this as its making some odd noises down there!

I know there are threads on this, but some of the links have expired.

I am looking for any detailed instructions to do this on our cars - it's a tight space! Do you need to remove the pedal box to do it right?

Any help much appreciated!!!!

Michael

48

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: 1985 Center Dome Light

« on: August 23, 2019, 19:13:42 »

This is it
https://www.roverparts.com/Parts/PRC1634

49

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: 1985 MKIV Wiring Diagram

« on: August 21, 2019, 23:11:39 »

For sure! Drop me your email address - I sent you a direct message.
M

50

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: Owners Manual and Wheel Hex Nuts

« on: July 11, 2019, 17:01:21 »

Thanks Keith,
I have an early MKIV - if anyone knows the difference let me know!
M

51

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: Owners Manual and Wheel Hex Nuts

« on: July 04, 2019, 20:04:04 »

Drop me the details on direct message Uwe
M

52

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: Owners Manual and Wheel Hex Nuts

« on: July 03, 2019, 19:58:54 »

Thanks!

53

Mk IV, Superblower, CRS and other Continuation Cars Forum / Owners Manual and Wheel Hex Nuts

« on: June 30, 2019, 22:20:51 »

I am getting to the end of my restoration of AK1099. I still need an original owners handbook and the Wheel Hex nuts.

If anyone has any ideas....

M

54

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: AC MKIV Brakes parts and pads - Help needed

« on: May 19, 2019, 15:19:40 »

https://www.ebay.com/itm/C-TEK-Standard-Metallic-Brake-Pad-fits-1971-1989-Peugeot-505-504-604-CENTRIC-PA-/132795740432?hash=item1eeb3e3110

These are the ones I used for the Peugeot calipers. Just cut the wires off.

M

55

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: Hex Wheel Nuts

« on: December 02, 2018, 23:24:10 »

Thanks

56

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: CRS Bits

« on: December 02, 2018, 23:23:29 »

Interested in the Hex nuts. Drop me a PM with details

57

Mk IV, Superblower, CRS and other Continuation Cars Forum / Re: 1988 AK 1234 Front brake lines

« on: June 12, 2018, 02:14:51 »

Hose and Fittings in Sacramento CA. I got coated braided lines but they can match original too. Just send over the old ones

58

Mk IV, Superblower, CRS and other Continuation Cars Forum / Hex Wheel Nuts

« on: June 10, 2018, 21:04:55 »

Hi,
Anyone have a set of the original hex nuts for the wheels? I have the wrench and the wheels.....but not the nuts....
Michael

59

Mk IV, Superblower, CRS and other Continuation Cars Forum / Brake Servo/Booster and Master Cylinder

« on: April 15, 2018, 12:51:26 »

I was considering a little project to upgrade the Brake Booster on my MKIV, inspired by fitting a modern Corvette booster to my 69 Camaro. Has anyone done this? Know anything thats an easy fit with minimal rework?
All thoughts most welcome.
M

60

Mk IV, Superblower, CRS and other Continuation Cars Forum / Brake pads

« on: October 19, 2017, 00:41:47 »

These are the rears:
   Part #: CE102.01570
   Centric Brake Pad Sets 2-Wheel Set Rear New Sedan Peugeot 504 505 102.01570
   Centric
   Qty: 1.00
   Price: $ 16.55
   
   I haven't bought the fronts but they are BMW E23 calipers so you should be able to find pretty easy.
   
   M