AC Owners Club Forum

AC Owners Club Forum => Mk IV, Superblower, CRS and other Continuation Cars Forum => Topic started by: nightrider on March 29, 2016, 16:09:57

Title: what size Avons
Post by: nightrider on March 29, 2016, 16:09:57
Can you please help what size front and rear Avons should I put on my 15" wheels the man at Avon says 245 front and 275 rear, not sure!
   Thanks
Title: what size Avons
Post by: nick Godridge on March 29, 2016, 19:01:44
I have 275 rear and 225 front for what its worth.
Title: what size Avons
Post by: nightrider on March 29, 2016, 22:17:31
Thank you for that
Title: what size Avons
Post by: SB7019 on March 29, 2016, 22:25:36
The 245s tend to rub against the inner wheel arch mouldings.  225 seem to be the best fit for front and 275 for rears.
Title: what size Avons
Post by: bobbylangley on March 29, 2016, 23:47:54
I fitted 245s to the front and had to change them in the end as they rubbed a hole in the inner panels so changed to the slimmer ones.
Title: what size Avons
Post by: crs28 on March 30, 2016, 14:59:40
my crs runs :
   
   front tyres   Avon CR6ZZ 225/60*15
   rear tyres   Avon CR6ZZ 275/55*15
Title: what size Avons
Post by: nightrider on April 01, 2016, 14:07:17
Thank you very helpful, cant take them back once there fitted, I am
   CRS#27 Cheers
Title: what size Avons
Post by: AC Ventura on April 03, 2016, 23:59:10
I have a aluminium. MK IV 1993. I researched this extensively before ordering from Avon as I didn't want he car looking undertyred. I went to the trouble of making precise hardboard templates and attached them to my 15" wheels and checked the rolling clearance empirically in all steering positions.
   
   I concluded and fitted with no problems.
   
   Front Avon ZZ 225/65/R15
   Rear Avon ZX 275/55/R15
   
   There are great benefits to this combination, in as much as both front and rear are the same diameters and look great. The front 65 profile as opposed to the commonly fitted 60 is a full inch bigger in diameter, which will give you more ground clearance and as well as a more period high profile look.
   
   There are no wheel arch rubbing issues whatsoever and my car being late model, did not require bending the steering arms. I do more mileage than most on my MK IV, covering 6000 miles last year all over Europe.
   
   I can only speak for my car. Don't be tempted to fit 295 on the back, they will be too tight.
   
   Order direct from Avon and ask for competition discount.
   
   I'm near London if you want to see for yourself, or you can borrow the templates if you want.
Title: what size Avons
Post by: nightrider on April 05, 2016, 16:46:05
Thank you for your experience and opinion I will now go ahead and speak to Avon PS glad you are putting the miles on your car no point keeping it in the garage Best Wishes
Title: what size Avons
Post by: ANF289 on May 05, 2016, 19:16:08
quote:
Originally posted by AC Ventura
   
I have a aluminium. MK IV 1993. I researched this extensively before ordering from Avon as I didn't want he car looking undertyred. I went to the trouble of making precise hardboard templates and attached them to my 15" wheels and checked the rolling clearance empirically in all steering positions.
   
   I concluded and fitted with no problems.
   
   Front Avon ZZ 225/65/R15
   Rear Avon ZX 275/55/R15
   
   There are great benefits to this combination, in as much as both front and rear are the same diameters and look great. The front 65 profile as opposed to the commonly fitted 60 is a full inch bigger in diameter, which will give you more ground clearance and as well as a more period high profile look.
   

   Any chance you can post a picture?
Title: what size Avons
Post by: AC Ventura on May 06, 2016, 14:34:04
Front Avon ZZ 225/65/R15
   Rear Avon ZX 275/55/R15
   
   (http://i133.photobucket.com/albums/q70/crbox/FullSizeRender.jpg)
   
   (http://i133.photobucket.com/albums/q70/crbox/2015-04-15%2017.31.36.jpg)
Title: what size Avons
Post by: BBK on May 07, 2016, 06:02:09
Any tips on where one can obtain 15" wheels for front and rear?  I believe there were posts before on the topic but the 15" wheels were no longer available. Is that the case or is someone now making 15" wheels that fit appropriately for the Mk. IV cars?  I believe that Hawk Cars used to have 15" wheels. There are Trigo 15" wheels here in the U.S. and I had them test fitted to my car but there were fitment issues.
Title: what size Avons
Post by: Kevin C on May 07, 2016, 12:14:45
Redline Engineering here in the UK have recently started to produce 15 inch wheels. I enquired yesterday and they told me they are produced in the UK and primarily designed to fit the Autokraft cars, as are their stainless steel spinners. They didn't have any in stock but expect their next batch within the next two weeks.
   
   Has anybody bought a set of the Redline wheels and if so what do they think of them?
Title: what size Avons
Post by: nightrider on May 10, 2016, 15:12:32
Vintage Wheels USA will make you a fantastic set of correct 15" wheels speak to Bob Lacey he knows the Autocraft MK 1V and offset required and is very helpful, cost is about £1,800.00 plus shipping and VAT they will finnish them any way you want coloured  centers, polished or mat rims,mine fit perfectly .
Title: what size Avons
Post by: AC Ventura on May 10, 2016, 23:15:23
I don't know about the Vintage wheel product, but Trigo's are not the same. My car above has one of the last  sets of Hawk's 15" units. Had anybody checked with Gerry at Hawk, that he's not commissioning  production off them, once more?
Title: what size Avons
Post by: BBK on May 12, 2016, 07:16:52
quote:
Originally posted by nightrider
   
Vintage Wheels USA will make you a fantastic set of correct 15" wheels speak to Bob Lacey he knows the Autocraft MK 1V and offset required and is very helpful, cost is about £1,800.00 plus shipping and VAT they will finnish them any way you want coloured  centers, polished or mat rims,mine fit perfectly .
   

   
   Thanks.  I will check it out!
Title: what size Avons
Post by: BBK on May 12, 2016, 15:10:24
quote:
Originally posted by AC Ventura
   
I don't know about the Vintage wheel product, but Trigo's are not the same. My car above has one of the last  sets of Hawk's 15" units. Had anybody checked with Gerry at Hawk, that he's not commissioning  production off them, once more?
   

   
   Gerry advises he does not have any in stock and will be awhile before any are made due to need for new tooling.