AC Owners Club Forum
AC Owners Club Forum => General Forum => Topic started by: Chafford on February 04, 2007, 18:08:20
-
According to the AC Cars website, aluminium bodied cars are still made to special order to the original specification from the original tooling.
So where are these cars being made? Frimley? Malta? Brooklands Motor Company?
-
In their dreams! AC has no facilty or staff qualified to make alloy bodies. They would have to "sublet" the work. Perhaps they could rebadge a Kirkham!
There are people who have contracted for replacement bodies/panels who are still waiting for delivery from orders placed in the Frimley era.
Rick
-
I seem to recall a few months ago that AC placed an advertisement for an aluminium car they were completing. Never found out where it was being built.
-
I live about 10mins from the frimley building, got cleared out long time ago. I know a few of the AC guys, nothing is done in the UK at the moment. If they have Alu bodies, either Kirkham or someone else is doing them. I believe they have some of the original jigs, etc. in Malta.
John.
-
What is a Kirkham? Is that the car that Gerry Hawkridge gets made up in an aerospace factory in Poland, or are they badged Hawk? I saw one of Gerry's cars a while ago being built. I must say that the quality of the aluminium was very impressive
Keith
-
Bodies, chassis and suspensions made at Kirkham's former MIG factory in Poland, cars completed by Hawk who are the European agents for Kirkham.
http://www.kirkhammotorsports.com/mfg/index.html
-
quote:
Originally posted by Mark IV
In their dreams! AC has no facilty or staff qualified to make alloy bodies. They would have to "sublet" the work. Perhaps they could rebadge a Kirkham!
There are people who have contracted for replacement bodies/panels who are still waiting for delivery from orders placed in the Frimley era.
Rick
I wonder if now that AC have appointed (according to the "AC Cars Manufacturing Ltd" (http://"http://www.racecar.co.uk/acoc/forum/topic.asp?TOPIC_ID=80")thread) The Brooklands Motor Company (http://"http://www.brooklandsmotorcompany.co.uk") as their official service/repair agents in the UK whether the above orders might be fulfilled?
I also believe that Brooklands employ several ex-AC craftsmen, so any parts or repairs from them have a 'certified bloodline'![8D]
-
'Certified' being the operative word (just a joke Steve - it's a joke.......aarrgghhh) keep bending that aluminium - or is it now called aluminum??
-
quote:
Originally posted by Mark IV
There are people who have contracted (WITH DEPOSITS!!!!) for replacement bodies/panels who are still waiting for delivery from orders placed in the Frimley era.
Rick
-
quote:
I wonder if now that AC have appointed (according to the "AC Cars Manufacturing Ltd" (http://"http://www.racecar.co.uk/acoc/forum/topic.asp?TOPIC_ID=80")thread) The Brooklands Motor Company (http://"http://www.brooklandsmotorcompany.co.uk") as their official service/repair agents in the UK whether the above orders might be fulfilled?
I also believe that Brooklands employ several ex-AC craftsmen, so any parts or repairs from them have a 'certified bloodline'![8D]
There's a thought. Aluminium continuation cars produced by the Brooklands Motor Company under licence from AC Cars. The cars would be known as Brooklands ACs! AC would grant Brooklands a 25 year license to use the AC trademark and the chassis numbers would be prefixed by BL! [:)][:)]
Far-fetched? I'm sure it could be done! [;)]
-
Why bother to say 'far-fetched'? You should read the postings on Club Cobra more closely, especially those from Amy Boylan. (You know, Chief Executive, Shelby Automotive, or whatever it is today)
I don't think its a state secret to point out that AC Frimley (and 'AC Guildford') was kept afloat by the good services of dear old Basher of Brooklands, in the metal bending dept., nor that Hawk Cars came to the rescue by supplying/trading parts. Both companies hung out to dry of course, but that's not for here, but I might go so far as to suggest....arrgghhh....
-
That's the word on this side of the pond. Aluminum (that's also for this side of the pond) bodies were supplied, but not paid for is what I heard in the grapevine here. I wonder if David Kirkham was approached for production of Shelby's but after this experience and thus their short engagement, decided he was better off alone.
Gus
-
Kirkham supplied circa 100 bodies to Shelby before the AC/Lubinsky deal was done.
-
quote:
Originally posted by Trevor Legate
Why bother to say 'far-fetched'? You should read the postings on Club Cobra more closely, especially those from Amy Boylan. (You know, Chief Executive, Shelby Automotive, or whatever it is today)
I don't think its a state secret to point out that AC Frimley (and 'AC Guildford') was kept afloat by the good services of dear old Basher of Brooklands, in the metal bending dept., nor that Hawk Cars came to the rescue by supplying/trading parts. Both companies hung out to dry of course, but that's not for here, but I might go so far as to suggest....arrgghhh....
Agreed. But strange that Brooklands are the official service and repair agents for AC.
-
quote:
Originally posted by hawk289
I live about 10mins from the frimley building, got cleared out long time ago. I know a few of the AC guys, nothing is done in the UK at the moment. If they have Alu bodies, either Kirkham or someone else is doing them. I believe they have some of the original jigs, etc. in Malta.
John.
John ,you say you are 10 mins from the old AC factory in Frimley,so am I were abouts are you ?
-
Hi,
I'm in Fleet, Hampshire, about 3-4mins from Junc 4a.
John
-
John, small world ,Im in Farnborough just down the road from you
-
So less than ten mins, send me an email john_abel289@hotmail.com
-
Hi,Classic Autos of Kings Langley,Herts,have been hand building aluminium bodies for Aces,to the best of my knowledge for at least 30 years to the original spec.Why go to Poland?
-
quote:
Originally posted by PHILIP BARTON
Hi,Classic Autos of Kings Langley,Herts,have been hand building aluminium bodies for Aces,to the best of my knowledge for at least 30 years to the original spec.Why go to Poland?
(http://www.icanefile.org/images/money_in_hand.jpg)
[?]
[edit] Do, or have, Classic Autos build Cobra bodies? I don`t think that the Kirkhams offer an Ace body, but they are tooled for MkI/II/III, FiA & 427 S/C Cobra shells.
-
Apples and oranges im afraid .